The Complete Guide To Güde 20039: Specifications, Pros And Cons, Troubleshooting, And Buying Tips
Güde 20039 Information
the information about the Güde 20039:
Introduction
The Güde 20039 is a versatile MIG/MAG welding machine that can be used for a variety of applications, including welding steel, aluminum, and stainless steel. It features a powerful 190 amp motor, a wide range of welding settings, and a number of safety features. The Güde 20039 is a great choice for both professional and DIY welders.
Image
Specifications
- Power: 230/400 V, 50/60 Hz
- Current range: 30-200 A
- Voltage range: 17-34 V
- Duty cycle: 30% at 200 A
- Wire feed speed: 2-15 m/min
- Gas flow rate: 10-25 l/min
- Weight: 71.3 kg
Features
- Powerful 190 amp motor
- Wide range of welding settings
- Digital display
- Safety features: thermal overload protection, arc fault protection, and reverse polarity protection
- Dust-proof and water-resistant housing
- Carry handle
What's in the box
- Güde 20039 welding machine
- 4 m welding cable with torch
- Gas hose
- Ground clamp
- Instruction manual
Conclusion
The Güde 20039 is a powerful and versatile MIG/MAG welding machine that is a great choice for both professional and DIY welders. It features a wide range of welding settings, a powerful motor, and a number of safety features. The Güde 20039 is a great value for the price.
Here is a table of the specifications for the Güde 20039:
| Feature | Specification |
|---|---|
| Power | 230/400 V, 50/60 Hz |
| Current range | 30-200 A |
| Voltage range | 17-34 V |
| Duty cycle | 30% at 200 A |
| Wire feed speed | 2-15 m/min |
| Gas flow rate | 10-25 l/min |
| Weight | 71.3 kg |
I hope this information is helpful. Let me know if you have any other questions.
Güde 20039 Compare with Similar Item
a table comparing the Güde 20039 with two similar items:
| Feature | Güde 20039 | Bosch GLM 50 C Professional | Makita 4033BLX |
|---|---|---|---|
| Laser Class | 2 | 2 | 2 |
| Range | 100 m | 120 m | 80 m |
| Accuracy | ± 1 mm | ± 1 mm | ± 1.5 mm |
| Price | $120 | $150 | $140 |
| Weight | 1.2 kg | 0.7 kg | 1.6 kg |
| Battery Life | 20 hours | 20 hours | 18 hours |
| Warranty | 2 years | 3 years | 3 years |
As you can see, the Güde 20039 is a good value for the price, as it offers a long range, good accuracy, and a long battery life. However, it is not the lightest or most compact laser level on the market. The Bosch GLM 50 C Professional is a more expensive option, but it is lighter and has a longer range. The Makita 4033BLX is also a good option, as it is very accurate and has a long battery life. However, it is the heaviest of the three lasers.
Ultimately, the best laser level for you will depend on your individual needs and budget. If you are looking for a good value option, the Güde 20039 is a great choice. If you are looking for a lightweight or long-range laser level, the Bosch GLM 50 C Professional is a good option. And if you are looking for the most accurate laser level, the Makita 4033BLX is a good choice.
Here is a more detailed comparison of the three lasers:
Güde 20039
- Pros: Good value, long range, long battery life
- Cons: Not the lightest or most compact laser level
Bosch GLM 50 C Professional
- Pros: Light, long range, long battery life
- Cons: More expensive than the Güde 20039
Makita 4033BLX
- Pros: Very accurate, long battery life
- Cons: Heaviest of the three lasers
I hope this helps!
Güde 20039 Problems and Solutions
some common issues and solutions for the Güde 20039:
- The saw blade is not aligned properly. This can cause the saw to bind or wander, and can also lead to inaccurate cuts. To align the saw blade, follow these steps:
- Loosen the screws that hold the saw blade in place.
- Use a square to make sure that the saw blade is aligned parallel to the table.
- Tighten the screws to secure the saw blade in place.
- The saw blade is dull. A dull saw blade will make it difficult to cut through material, and can also lead to inaccurate cuts. To sharpen the saw blade, follow these steps:
- Remove the saw blade from the saw.
- Use a file or a sharpening stone to sharpen the teeth of the saw blade.
- Reinstall the saw blade in the saw.
- The saw is not making a clean cut. This can be caused by a dull saw blade, a dirty saw blade, or a misalignment of the saw blade. To troubleshoot this issue, follow these steps:
- Check the saw blade to make sure that it is sharp.
- Clean the saw blade with a wire brush or a vacuum cleaner.
- Align the saw blade as described above.
- The saw is binding. This can be caused by a dull saw blade, a dirty saw blade, or a misalignment of the saw blade. To troubleshoot this issue, follow these steps:
- Check the saw blade to make sure that it is sharp.
- Clean the saw blade with a wire brush or a vacuum cleaner.
- Align the saw blade as described above.
If you are still having problems with your Güde 20039, you may want to contact Güde customer support for assistance.
Here are some additional tips for troubleshooting common problems with the Güde 20039:
- Make sure that the saw is properly assembled.
- Use the correct type of saw blade for the material you are cutting.
- Apply pressure to the saw blade evenly.
- Do not overload the saw.
- Take breaks to allow the saw to cool down.
I hope this helps!
Güde 20039 Manual
Güde 20039 Soldering Station
Safety Information
- Read and understand all safety instructions before using this soldering station.
- Keep the soldering station out of the reach of children and unauthorized personnel.
- Do not use the soldering station in a damp or wet environment.
- Do not use the soldering station near flammable materials.
- Always wear safety glasses when using the soldering station.
- Do not touch the hot soldering iron tip.
- Allow the soldering iron tip to cool completely before storing it.
Before Use
- Make sure that the soldering station is properly grounded.
- Connect the soldering station to a power outlet.
- Select the desired temperature setting.
- Allow the soldering iron to heat up for a few minutes before use.
Troubleshooting
- If the soldering iron does not heat up, check the power cord and the power outlet.
- If the soldering iron tip is not melting solder, check the temperature setting.
- If the solder is not flowing smoothly, clean the soldering iron tip.
Maintenance
- Clean the soldering iron tip regularly with a damp sponge or cloth.
- Apply a thin layer of flux to the soldering iron tip before each use.
- Store the soldering station in a cool, dry place.
Warranty
This soldering station is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the soldering station fails during the warranty period, it will be repaired or replaced free of charge.
Contact Information
Güde
Tel: +49 7572 94000
Fax: +49 7572 940010
Email: [email protected]
Website: https://www.gude.de/
Additional Information
- The soldering iron tip should be cleaned regularly to prevent oxidation.
- The soldering iron should be stored in a cool, dry place when not in use.
- Always use the correct type of solder for the application.
- Do not overload the soldering station.
Safety Notice
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Comments
Post a Comment